phone icon951-319-4402

We Bill Insurance!

Family Owned And Operated for over 20 years!

clock with 24 and 7 near the hands

60 Minute Response! phone icon 951-319-4402 Emergency Plumbing Help


Slab Leak Repair Temescal Canyon



Have you been told you have a slab leak in Temescal Canyon? When it comes to Slab leak detection in Temescal Canyon, 247 LeakMasters a local and family owned business is your go to solution. We diagnose leaks, fix pipes and clean up any water or flood damage by using the latest electronic leak detection equipment. Our expertise allows for us to repair your leak with the minimal amount of damage.

We are licensed contractors can perform quality repairs to any damage you have. Working with the insurance company can be a pain! Don’t worry, we will work directly with your insurance company and adjuster.

We do not charge for call outs. Call us today to find out how your detection could be FREE! We can be with you in less than 60 minutes! In addition to fixing your slab leak we provide full service water damage restoration for Temescal Canyon homes. If you think you may have a slab leak, don’t delay, call us today!

Slab Leak Repair in Temescal Canyon

What is a slab leak?

Plumbing in most homes in Temescal Canyon utilize copper piping underneath a concrete foundation. Copper pipes are know to be susceptible to developing cracks and holes as time goes on. This leads to what is known as a slab leak. Because the leak source is not visible by the time you actually see the water damage can be extensive. To minimize damage to your home from a slab leak is important to act quickly.



247 Emergency Leak Detection

Get Emergency Plumbing Help!







What does a slab leak look like?


If you can see the pipe, even a small leak is easy to trace. Slab leaks occur in the pipes buried deep in the concrete foundation of your home meaning that is not always visible.


How can I tell if I have a slab leak?

Although it may not be possible to see the slab leak you can use the following techniques to diagnose an unseen leak:

  1. Unusually High Water Bills – even the smallest hole in a water pipe can lose thousands of gallons per month. Check your water bill increased usage you cannot explain.
  2. Sound of Running Water – if you can hear water moving quickly through the pipes when faucets & appliances are off, you may have an issue.
  3. Moving Water Meter – If all appliances and faucets in the house are turned off and the meter is stil moving, you could have a problem.
  4. Standing Water or Saturated Ground - If a leak is left undetected for a long time, water can create a damp patch on the floor
Slab Leak Repair


What causes a slab leak?


While copper pipe is regarded as a reliable and long-lasting plumbing material, it can still fail. Some of the most common causes include:

Slab Leak Broken Copper Pipe
  1. Age - as a pipe gets older leaks become more likely. Our experience shows that homes over 25 years old are more likely to suffer a slab leak, but homes of any age can be affected.
  2. Incorrect Installation – if the pipe was bent or damaged when installed, problems can occur in later years.
  3. Temperature Changes - as the slab increases & decreases the pipes expand and contract. Vibration or or edges rubbing against the pipe can create holes.

Whatever the reason for the slab leak, it is important that the problem is found and repaired by a qualified plumber. This will prevent further, more expensive issues.


How can I find a slab leak?


Finding the general area of a slab leak from the hot water line is straightforward. By using the electronic leak detector around a hot spot on the floor will help us pinpoint the location. Leaks from the cold-water line are much more difficult to locate. Because the pipe is buried, we must use an electro-acoustic leak detection device so we can ‘hear’ where the issue is. Our equipment reveals the exact location of the leak in the slab. Finding the location of the issue is done in a non destructive way because we use the latest electronic leak detection equipment. Pinpoint accuracy helps us reduce time and costs for your repair.


What is slab leak detection & how does it work?


Slab leak detection uses electronic equipment to locate the source of the leak. Water flow and hole size cause a sound to be emitted with a unique frequency by the leak. The problem is located when the detector picks up the sound. We avoid digging up the floor to find the issue because the sound travels through the slab. The entire operation is non-invasive & non-destructive.


How do I repair a slab leak?


Once you know you have a slab leak, you have choices for repair. If the pipes are easily accessible we can make a direct repair, but this is rarely the case with slab leaks. We do not usually recommend digging up the floor to repair the leak as this can move the pipe and cause more problems in the future. Instead, a new pipe can be routed through the framework of the house isolating the area with leak.


Slab Leak Repair Service


The skills required for slab leak repair; detection, re-piping and water damage restoration are vast. 247 LeakMasters are licensed plumbers and contractors, able to handle the complete job. Don’t worry about dealing with your insurance company. We will help you every step of the way.



The more time that goes by before identifying a slab leak generally correlates to increased damage and repair fees. We can have a plumbing technician from 247 LeakMasters at your Temescal Canyon property in 60 minutes or less, 24 hours a day, 7 days a week. As a family owned, run and operated local business, we have over 20 years experience as the slab leak repair experts! Call today for your peace of mind!