phone icon760-385-8292

We Bill Insurance!

Family Owned And Operated for over 20 years!

clock with 24 and 7 near the hands

60 Minute Response! phone icon 760-385-8292 Emergency Plumbing Help


Slab Leak Repair Fallbrook Junction


Think you have a slab leak in your Fallbrook Junction home or business? When it comes to Slab leak detection in Fallbrook Junction, 247 LeakMasters a local and family owned business is your go to solution. Using top of the line electronic leak detection equipment, we find the source and fix your leak and pipes, and repair any water or flood damage. We figure out the best way to fix the leak without digging a big hole in your floor.

We are licensed contractors can perform quality repairs to any damage you have. As industry experts, we have plenty of experience working with directly with your insurance company for piece of mind.

We do not charge for call outs. Call us today to find out how your detection could be FREE! We can be with you in less than 60 minutes! In addition to fixing your slab leak we provide full service water damage restoration for Fallbrook Junction homes. If you think you may have a slab leak, don’t delay, call us today!

Slab Leak Repair in Fallbrook Junction

What is a slab leak?

Plumbing in most homes in Fallbrook Junction utilize copper piping underneath a concrete foundation.  Despite the fact that copper is a reliable plumbing material, cracks and holes can develop over time. The water coming from under the foundation is referred to as a slab leak. It takes time for the water to become visible since the source generally is not visible. Slab leaks can cause substantial damage. It is important to act quickly to minimize exposure to your home.



247 Emergency Leak Detection

Get Emergency Plumbing Help!






What does a slab leak look like?

If you can see the pipe, even a small leak is easy to trace. Slab leaks occur in the pipes buried deep in the concrete foundation of your home meaning that is not always visible.

How can I tell if I have a slab leak?

Although it may not be possible to see the slab leak you can use the following techniques to diagnose an unseen leak:

  1. Unusually High Water Bills – even the smallest hole in a water pipe can lose thousands of gallons per month. Check your water bill increased usage you cannot explain.
  2. Sound of Running Water – if you can hear water moving quickly through the pipes when faucets & appliances are off, you may have an issue.
  3. Moving Water Meter – If all appliances and faucets in the house are turned off and the meter is stil moving, you could have a problem.
  4. Standing Water or Saturated Ground - If a leak is left undetected for a long time, water can create a damp patch on the floor
Slab Leak Repair


What causes a slab leak?

While copper pipe is regarded as a reliable and long-lasting plumbing material, it can still fail. Some of the most common causes include:

Slab Leak Broken Copper Pipe
  1. Age - as a pipe gets older leaks become more likely. Our experience shows that homes over 25 years old are more likely to suffer a slab leak, but homes of any age can be affected.
  2. Incorrect Installation – if the pipe was bent or damaged when installed, problems can occur in later years.
  3. Temperature Changes - as the slab increases & decreases the pipes expand and contract. Vibration or or edges rubbing against the pipe can create holes.

Whatever the reason for the slab leak, it is important that the problem is found and repaired by a qualified plumber. This will prevent further, more expensive issues.


How can I find a slab leak?

Finding the general area of a slab leak from the hot water line is straightforward. The exact location is easy to find with our leak detector once we find the hotspot on the floor. Cold-water line leaks present a much more challenging issue to locate. An electronic water leak detection device must be used to ‘listen’ to the length of buried pipe. Identifying the location of the leak in the slab is possible with our specialized device. Modern electronic leak detection equipment means you do not have to dig into the floor to find the problem. Finding the exact location can greatly reduce the time and cost of the repair.

What is slab leak detection & how does it work?

Detecting a slab leak’s exact location requires electronic equipment. The flow of water and size of the hole gives the leak a unique sound at a customized frequency. The equipment isolates the sound and locks on to the issue location. We don't dig up your floor to search for the problem because we can detect the sound coming through the slab. Non-destructive and non-invasive techniques are our specialty.

How do I repair a slab leak?

Once you know you have a slab leak, you have choices for repair. If the pipes are easily accessible we can make a direct repair, but this is rarely the case with slab leaks. We do not usually recommend digging up the floor to repair the leak as this can move the pipe and cause more problems in the future. Instead, a new pipe can be routed through the framework of the house isolating the area with leak.

Slab Leak Repair Service

Water damage restoration, repiping, and detection and slab leak repairs take a variety of skills. All or our plumbers are also licensed and insured contractors who can take on the task. Our friendly technicians are experts at dealing directly with your homeowners insurance to give you peace of mind.



If you suspect you have slab leak it is important to have a professional diagnose it right away to keep damage and costs down. We can have a plumbing technician from 247 LeakMasters at your Fallbrook Junction property in 60 minutes or less, 24 hours a day, 7 days a week. We are locally based and family owned slab repair services experts. Call Us Today!