phone icon760-385-8292

We Bill Insurance!

Family Owned And Operated for over 20 years!

clock with 24 and 7 near the hands

60 Minute Response! phone icon 760-385-8292 Emergency Plumbing Help


Slab Leak Repair South Oceanside


Think you have a slab leak in your South Oceanside home or business? 247 LeakMasters is a family owned and operated slab leak detection and repair business. Using top of the line electronic leak detection equipment, we find the source and fix your leak and pipes, and repair any water or flood damage. We treat your home like ours and use non-invasive techniques to repair your leak.

We are licensed contractors can perform quality repairs to any damage you have. We interface directly with your insurance provider so you can focus on more important things!

We do not charge for call outs. Call us today to find out how your detection could be FREE! We can be with you in less than 60 minutes! In addition to fixing your slab leak we provide full service water damage restoration for South Oceanside homes. If you think you may have a slab leak, don’t delay, call us today!

Slab Leak Repair in South Oceanside

What is a slab leak?

Most South Oceanside homes have copper piping under a concrete slab type foundation. Copper pipes are know to be susceptible to developing cracks and holes as time goes on. Since the leak source is under concrete and is not easily detectible, by the time you notice the issue it has caused damage already. This is what is known as a slab leak. To minimize damage to your home from a slab leak is important to act quickly.



247 Emergency Leak Detection

Get Emergency Plumbing Help!






What does a slab leak look like?

If you can see the pipe, even a small leak is easy to trace. Slab leaks occur in the pipes buried deep in the concrete foundation of your home meaning that is not always visible.

How can I tell if I have a slab leak?

Although it may not be possible to see the slab leak you can use the following techniques to diagnose an unseen leak:

  1. Unusually High Water Bills – even the smallest hole in a water pipe can lose thousands of gallons per month. Check your water bill increased usage you cannot explain.
  2. Sound of Running Water – if you can hear water moving quickly through the pipes when faucets & appliances are off, you may have an issue.
  3. Moving Water Meter – If all appliances and faucets in the house are turned off and the meter is stil moving, you could have a problem.
  4. Standing Water or Saturated Ground - If a leak is left undetected for a long time, water can create a damp patch on the floor
Slab Leak Repair


What causes a slab leak?

While copper pipe is regarded as a reliable and long-lasting plumbing material, it can still fail. Some of the most common causes include:

Slab Leak Broken Copper Pipe
  1. Age - as a pipe gets older leaks become more likely. Our experience shows that homes over 25 years old are more likely to suffer a slab leak, but homes of any age can be affected.
  2. Incorrect Installation – if the pipe was bent or damaged when installed, problems can occur in later years.
  3. Temperature Changes - as the slab increases & decreases the pipes expand and contract. Vibration or or edges rubbing against the pipe can create holes.

Whatever the reason for the slab leak, it is important that the problem is found and repaired by a qualified plumber. This will prevent further, more expensive issues.


How can I find a slab leak?

It’s fairly easy to find the location of a slab leak from the hot water line. A hot spot on the floor will give the approximate location, allowing for us to quickly find the accurate location using a leak detector. Locating a cold water-line leak is very challenging. Because the pipe is buried, we must use an electro-acoustic leak detection device so we can ‘hear’ where the issue is. The device will accurately pinpoint the location of the leak within the slab. Modern electronic leak detection equipment means you do not have to dig into the floor to find the problem. Pinpoint accuracy helps us reduce time and costs for your repair.

What is slab leak detection & how does it work?

Slab leak detection uses electronic equipment to locate the source of the leak. Water flow and hole size cause a sound to be emitted with a unique frequency by the leak. The sound is picked up by the detector and used to locate the problem. Because the sound travels through the slab, it is not necessary to dig up the floor to search for the problem. Non-invasive and non-destructive techniques are always used.

How do I repair a slab leak?

Once you know you have a slab leak, you have choices for repair. If the pipes are easily accessible we can make a direct repair, but this is rarely the case with slab leaks. We do not usually recommend digging up the floor to repair the leak as this can move the pipe and cause more problems in the future. Instead, a new pipe can be routed through the framework of the house isolating the area with leak.

Slab Leak Repair Service

Many skills are required to successfully find and repair a slab leak; detection, re-piping and water damage restoration. As licensed contractors our plumbers at 247 LeakMasters are able to handle the size and scope of any job. We are insurance specialists and work directly with your homeowners insurance company so you don’t have to.



If you think you have a slab leak, do not delay. That will only lead to greater damage and increased costs. We truly are 24/7. We have 60 minutes response times for South Oceanside plumbing emergencies. We are ready to help! For more than 20 years we have provided local family owned service for slab leak repairs. Call now 60 minute service!