phone icon714-759-2975

We Bill Insurance!

Family Owned And Operated for over 20 years!

clock with 24 and 7 near the hands

60 Minute Response! phone icon 714-759-2975 Emergency Plumbing Help


Slab Leak Repair Placentia


Do you suspect that your Placentia home has a slab leak? When it comes to Slab leak detection in Placentia, 247 LeakMasters a local and family owned business is your go to solution. 247 LeakMasters expert plumbers use the very latest in leak detection technology to diagnose the source of a leak so we can fix the problem and repair all of your flood or water damage. Our expertise allows for us to repair your leak with the minimal amount of damage.

We are not just plumbers but fully licensed contractors, this allows us to perform any necessary repairs. We interface directly with your insurance provider so you can focus on more important things!

We do not charge for call outs. Call us today to find out how your detection could be FREE! We can be with you in less than 60 minutes! In addition to fixing your slab leak we provide full service water damage restoration for Placentia homes. If you think you may have a slab leak, don’t delay, call us today!

Slab Leak Repair in Placentia

What is a slab leak?

The plumbing systems in many properties in Placentia were installed with copper piping buried in the large concrete foundation.  Despite the fact that copper is a reliable plumbing material, cracks and holes can develop over time. This leads to what is known as a slab leak. Because the leak source is not visible by the time you actually see the water damage can be extensive. Slab leaks can cause substantial damage. It is important to act quickly to minimize exposure to your home.



247 Emergency Leak Detection

Get Emergency Plumbing Help!






What does a slab leak look like?

If you can see the pipe, even a small leak is easy to trace. Slab leaks occur in the pipes buried deep in the concrete foundation of your home meaning that is not always visible.

How can I tell if I have a slab leak?

Although it may not be possible to see the slab leak you can use the following techniques to diagnose an unseen leak:

  1. Unusually High Water Bills – even the smallest hole in a water pipe can lose thousands of gallons per month. Check your water bill increased usage you cannot explain.
  2. Sound of Running Water – if you can hear water moving quickly through the pipes when faucets & appliances are off, you may have an issue.
  3. Moving Water Meter – If all appliances and faucets in the house are turned off and the meter is stil moving, you could have a problem.
  4. Standing Water or Saturated Ground - If a leak is left undetected for a long time, water can create a damp patch on the floor
Slab Leak Repair


What causes a slab leak?

While copper pipe is regarded as a reliable and long-lasting plumbing material, it can still fail. Some of the most common causes include:

Slab Leak Broken Copper Pipe
  1. Age - as a pipe gets older leaks become more likely. Our experience shows that homes over 25 years old are more likely to suffer a slab leak, but homes of any age can be affected.
  2. Incorrect Installation – if the pipe was bent or damaged when installed, problems can occur in later years.
  3. Temperature Changes - as the slab increases & decreases the pipes expand and contract. Vibration or or edges rubbing against the pipe can create holes.

Whatever the reason for the slab leak, it is important that the problem is found and repaired by a qualified plumber. This will prevent further, more expensive issues.


How can I find a slab leak?

Finding the general area of a slab leak from the hot water line is straightforward. A hot spot on the floor will give the approximate location, allowing for us to quickly find the accurate location using a leak detector. Cold-water line leaks present a much more challenging issue to locate. Because the pipe is buried, we must use an electro-acoustic leak detection device so we can ‘hear’ where the issue is. We use specialized devices that show us with pinpoint accuracy where the slab leak is located. Finding the location of the issue is done in a non destructive way because we use the latest electronic leak detection equipment. Pinpoint accuracy helps us reduce time and costs for your repair.

What is slab leak detection & how does it work?

Detecting a slab leak’s exact location requires electronic equipment. The flow of water and size of the hole gives the leak a unique sound at a customized frequency. The problem is located when the detector picks up the sound. We avoid digging up the floor to find the issue because the sound travels through the slab. Our operations don't cause damage and are non-invasive.

How do I repair a slab leak?

Once you know you have a slab leak, you have choices for repair. If the pipes are easily accessible we can make a direct repair, but this is rarely the case with slab leaks. We do not usually recommend digging up the floor to repair the leak as this can move the pipe and cause more problems in the future. Instead, a new pipe can be routed through the framework of the house isolating the area with leak.

Slab Leak Repair Service

It takes a discipline of skills for slab leak detection, repair repiping and water damage restoration. As licensed contractors our plumbers at 247 LeakMasters are able to handle the size and scope of any job. We are insurance specialists and work directly with your homeowners insurance company so you don’t have to.



If you think you have a slab leak, do not delay. That will only lead to greater damage and increased costs. We truly are 24/7. We have 60 minutes response times for Placentia plumbing emergencies. We are ready to help! For more than 20 years we have provided local family owned service for slab leak repairs. Call now 60 minute service!