phone icon951-319-4402

We Bill Insurance!

Family Owned And Operated for over 20 years!

clock with 24 and 7 near the hands

60 Minute Response! phone icon 951-319-4402 Emergency Plumbing Help


Slab Leak Repair Belvedere Heights


Think you have a slab leak in your Belvedere Heights home or business? When it comes to Slab leak detection in Belvedere Heights, 247 LeakMasters a local and family owned business is your go to solution. Using top of the line electronic leak detection equipment, we find the source and fix your leak and pipes, and repair any water or flood damage. We treat your home like ours and use non-invasive techniques to repair your leak.

We are licensed contractors can perform quality repairs to any damage you have. As industry experts, we have plenty of experience working with directly with your insurance company for piece of mind.

We do not charge for call outs. Call us today to find out how your detection could be FREE! We can be with you in less than 60 minutes! In addition to fixing your slab leak we provide full service water damage restoration for Belvedere Heights homes. If you think you may have a slab leak, don’t delay, call us today!

Slab Leak Repair in Belvedere Heights

What is a slab leak?

Most Belvedere Heights homes have copper piping under a concrete slab type foundation. Copper pipes are know to be susceptible to developing cracks and holes as time goes on. Since the leak source is under concrete and is not easily detectible, by the time you notice the issue it has caused damage already. This is what is known as a slab leak. Quick action is of the upmost importance if you think you have a slab leak, this can prevent further damage to your home.



247 Emergency Leak Detection

Get Emergency Plumbing Help!






What does a slab leak look like?

If you can see the pipe, even a small leak is easy to trace. Slab leaks occur in the pipes buried deep in the concrete foundation of your home meaning that is not always visible.

How can I tell if I have a slab leak?

Although it may not be possible to see the slab leak you can use the following techniques to diagnose an unseen leak:

  1. Unusually High Water Bills – even the smallest hole in a water pipe can lose thousands of gallons per month. Check your water bill increased usage you cannot explain.
  2. Sound of Running Water – if you can hear water moving quickly through the pipes when faucets & appliances are off, you may have an issue.
  3. Moving Water Meter – If all appliances and faucets in the house are turned off and the meter is stil moving, you could have a problem.
  4. Standing Water or Saturated Ground - If a leak is left undetected for a long time, water can create a damp patch on the floor
Slab Leak Repair


What causes a slab leak?

While copper pipe is regarded as a reliable and long-lasting plumbing material, it can still fail. Some of the most common causes include:

Slab Leak Broken Copper Pipe
  1. Age - as a pipe gets older leaks become more likely. Our experience shows that homes over 25 years old are more likely to suffer a slab leak, but homes of any age can be affected.
  2. Incorrect Installation – if the pipe was bent or damaged when installed, problems can occur in later years.
  3. Temperature Changes - as the slab increases & decreases the pipes expand and contract. Vibration or or edges rubbing against the pipe can create holes.

Whatever the reason for the slab leak, it is important that the problem is found and repaired by a qualified plumber. This will prevent further, more expensive issues.


How can I find a slab leak?

Finding the general area of a slab leak from the hot water line is straightforward. A hot spot on the floor will give the approximate location, allowing for us to quickly find the accurate location using a leak detector. Cold-water line leaks present a much more challenging issue to locate. Listening to a buried pipe is essential and requires special electronic leak detection equipment. Identifying the location of the leak in the slab is possible with our specialized device. Modern electronic leak detection equipment means you do not have to dig into the floor to find the problem. Time and costs are reduced because we identify exactly where the repairs need to be done.

What is slab leak detection & how does it work?

Detecting a slab leak’s exact location requires electronic equipment. Sounds are emitted at varying frequencies from leaks depending on the size of the hole and the flow of the water. The problem is located when the detector picks up the sound. Because the sound travels through the slab, it is not necessary to dig up the floor to search for the problem. Non-destructive and non-invasive techniques are our specialty.

How do I repair a slab leak?

Once you know you have a slab leak, you have choices for repair. If the pipes are easily accessible we can make a direct repair, but this is rarely the case with slab leaks. We do not usually recommend digging up the floor to repair the leak as this can move the pipe and cause more problems in the future. Instead, a new pipe can be routed through the framework of the house isolating the area with leak.

Slab Leak Repair Service

It takes a discipline of skills for slab leak detection, repair repiping and water damage restoration. As licensed contractors our plumbers at 247 LeakMasters are able to handle the size and scope of any job. Homeowners insurance can seem scary. Our friendly staff are experts at dealing directly with your homeowners insurance and will be with you every step of the way.



Delays in diagnosing a slab leak can cause more damage drive up repair costs. We can have a plumbing technician from 247 LeakMasters at your Belvedere Heights property in 60 minutes or less, 24 hours a day, 7 days a week. We are a family owned local business that has been providing slab leak repair services for more than 20 years. Call us now!