phone icon951-319-4402

We Bill Insurance!

Family Owned And Operated for over 20 years!

clock with 24 and 7 near the hands

60 Minute Response! phone icon 951-319-4402 Emergency Plumbing Help


Slab Leak Repair Eagle Valley



Have you been told you have a slab leak in Eagle Valley? Family operated and local to Eagle Valley, 247 LeakMasters is your number 1 choice for slab leak detection. We diagnose leaks, fix pipes and clean up any water or flood damage by using the latest electronic leak detection equipment. We figure out the best way to fix the leak without digging a big hole in your floor.

We are licensed contractors can perform quality repairs to any damage you have. Working with the insurance company can be a pain! Don’t worry, we will work directly with your insurance company and adjuster.

We do not charge for call outs. Call us today to find out how your detection could be FREE! We can be with you in less than 60 minutes! In addition to fixing your slab leak we provide full service water damage restoration for Eagle Valley homes. If you think you may have a slab leak, don’t delay, call us today!

Slab Leak Repair in Eagle Valley

What is a slab leak?

Most Eagle Valley homes have copper piping under a concrete slab type foundation. Cracks and holes are known to develop over time in copper piped plumbing. The water coming from under the foundation is referred to as a slab leak. It takes time for the water to become visible since the source generally is not visible. If you suspect you have a slab leak, it is important to act quickly and avoid any further damage to your home.



247 Emergency Leak Detection

Get Emergency Plumbing Help!







What does a slab leak look like?


If you can see the pipe, even a small leak is easy to trace. Slab leaks occur in the pipes buried deep in the concrete foundation of your home meaning that is not always visible.


How can I tell if I have a slab leak?

Although it may not be possible to see the slab leak you can use the following techniques to diagnose an unseen leak:

  1. Unusually High Water Bills – even the smallest hole in a water pipe can lose thousands of gallons per month. Check your water bill increased usage you cannot explain.
  2. Sound of Running Water – if you can hear water moving quickly through the pipes when faucets & appliances are off, you may have an issue.
  3. Moving Water Meter – If all appliances and faucets in the house are turned off and the meter is stil moving, you could have a problem.
  4. Standing Water or Saturated Ground - If a leak is left undetected for a long time, water can create a damp patch on the floor
Slab Leak Repair


What causes a slab leak?


While copper pipe is regarded as a reliable and long-lasting plumbing material, it can still fail. Some of the most common causes include:

Slab Leak Broken Copper Pipe
  1. Age - as a pipe gets older leaks become more likely. Our experience shows that homes over 25 years old are more likely to suffer a slab leak, but homes of any age can be affected.
  2. Incorrect Installation – if the pipe was bent or damaged when installed, problems can occur in later years.
  3. Temperature Changes - as the slab increases & decreases the pipes expand and contract. Vibration or or edges rubbing against the pipe can create holes.

Whatever the reason for the slab leak, it is important that the problem is found and repaired by a qualified plumber. This will prevent further, more expensive issues.


How can I find a slab leak?


It’s fairly easy to find the location of a slab leak from the hot water line. The exact location is easy to find with our leak detector once we find the hotspot on the floor. It is difficult to pinpoint the exact location of cold water-line leaks. Listening to a buried pipe is essential and requires special electronic leak detection equipment. The device will accurately pinpoint the location of the leak within the slab. Finding the location of the issue is done in a non destructive way because we use the latest electronic leak detection equipment. Time and costs are reduced because we identify exactly where the repairs need to be done.


What is slab leak detection & how does it work?


The source of the leak requires electronic equipment that is made for slab leak detection. Water flow and hole size cause a sound to be emitted with a unique frequency by the leak. The sound is picked up by the detector and used to locate the problem. Sounds traveling through the slab helps us isolate the issue and avoid digging up your floor. Our operations don't cause damage and are non-invasive.


How do I repair a slab leak?


Once you know you have a slab leak, you have choices for repair. If the pipes are easily accessible we can make a direct repair, but this is rarely the case with slab leaks. We do not usually recommend digging up the floor to repair the leak as this can move the pipe and cause more problems in the future. Instead, a new pipe can be routed through the framework of the house isolating the area with leak.


Slab Leak Repair Service


The skills required for slab leak repair; detection, re-piping and water damage restoration are vast. As licensed contractors our plumbers at 247 LeakMasters are able to handle the size and scope of any job. Homeowners insurance can seem scary. Our friendly staff are experts at dealing directly with your homeowners insurance and will be with you every step of the way.



The more time that goes by before identifying a slab leak generally correlates to increased damage and repair fees. We truly are 24/7. We have 60 minutes response times for Eagle Valley plumbing emergencies. We are ready to help! For more than 20 years we have provided local family owned service for slab leak repairs. Call now 60 minute service!