phone icon951-319-4402

We Bill Insurance!

Family Owned And Operated for over 20 years!

clock with 24 and 7 near the hands

60 Minute Response! phone icon 951-319-4402 Emergency Plumbing Help


Slab Leak Repair Ormand


Do you suspect that your Ormand home has a slab leak? Family operated and local to Ormand, 247 LeakMasters is your number 1 choice for slab leak detection. We diagnose leaks, fix pipes and clean up any water or flood damage by using the latest electronic leak detection equipment. We figure out the best way to fix the leak without digging a big hole in your floor.

We are licensed contractors can perform quality repairs to any damage you have. As industry experts, we have plenty of experience working with directly with your insurance company for piece of mind.

We do not charge for call outs. Call us today to find out how your detection could be FREE! We can be with you in less than 60 minutes! In addition to fixing your slab leak we provide full service water damage restoration for Ormand homes. If you think you may have a slab leak, don’t delay, call us today!

Slab Leak Repair in Ormand

What is a slab leak?

Concrete slabs with copper piping run underneath the foundation are common in Ormand. Cracks and holes are known to develop over time in copper piped plumbing. Since the leak source is under concrete and is not easily detectible, by the time you notice the issue it has caused damage already. This is what is known as a slab leak. Slab leaks can cause substantial damage. It is important to act quickly to minimize exposure to your home.



247 Emergency Leak Detection

Get Emergency Plumbing Help!






What does a slab leak look like?

If you can see the pipe, even a small leak is easy to trace. Slab leaks occur in the pipes buried deep in the concrete foundation of your home meaning that is not always visible.

How can I tell if I have a slab leak?

Although it may not be possible to see the slab leak you can use the following techniques to diagnose an unseen leak:

  1. Unusually High Water Bills – even the smallest hole in a water pipe can lose thousands of gallons per month. Check your water bill increased usage you cannot explain.
  2. Sound of Running Water – if you can hear water moving quickly through the pipes when faucets & appliances are off, you may have an issue.
  3. Moving Water Meter – If all appliances and faucets in the house are turned off and the meter is stil moving, you could have a problem.
  4. Standing Water or Saturated Ground - If a leak is left undetected for a long time, water can create a damp patch on the floor
Slab Leak Repair


What causes a slab leak?

While copper pipe is regarded as a reliable and long-lasting plumbing material, it can still fail. Some of the most common causes include:

Slab Leak Broken Copper Pipe
  1. Age - as a pipe gets older leaks become more likely. Our experience shows that homes over 25 years old are more likely to suffer a slab leak, but homes of any age can be affected.
  2. Incorrect Installation – if the pipe was bent or damaged when installed, problems can occur in later years.
  3. Temperature Changes - as the slab increases & decreases the pipes expand and contract. Vibration or or edges rubbing against the pipe can create holes.

Whatever the reason for the slab leak, it is important that the problem is found and repaired by a qualified plumber. This will prevent further, more expensive issues.


How can I find a slab leak?

Generally it is pretty easy to use the hot water line to find the general area of a slab leak. Hot spots on the floor let us know where to use our electronic leak detector and zero in on the exact location of the problem. Locating a cold water-line leak is very challenging. Because the pipe is buried, we must use an electro-acoustic leak detection device so we can ‘hear’ where the issue is. Our equipment reveals the exact location of the leak in the slab. Finding the location of the issue is done in a non destructive way because we use the latest electronic leak detection equipment. Time and costs are reduced because we identify exactly where the repairs need to be done.

What is slab leak detection & how does it work?

Detecting a slab leak’s exact location requires electronic equipment. Water flow and hole size cause a sound to be emitted with a unique frequency by the leak. The equipment isolates the sound and locks on to the issue location. Sounds traveling through the slab helps us isolate the issue and avoid digging up your floor. The entire operation is non-invasive & non-destructive.

How do I repair a slab leak?

Once you know you have a slab leak, you have choices for repair. If the pipes are easily accessible we can make a direct repair, but this is rarely the case with slab leaks. We do not usually recommend digging up the floor to repair the leak as this can move the pipe and cause more problems in the future. Instead, a new pipe can be routed through the framework of the house isolating the area with leak.

Slab Leak Repair Service

The skills required for slab leak repair; detection, re-piping and water damage restoration are vast. All or our plumbers are also licensed and insured contractors who can take on the task. We are insurance specialists and work directly with your homeowners insurance company so you don’t have to.



The more time that goes by before identifying a slab leak generally correlates to increased damage and repair fees. 247 LeakMasters has 60 minute response times for Ormand around the clock. Our plumbing technicians are ready to help! As a family owned, run and operated local business, we have over 20 years experience as the slab leak repair experts! Call today for your peace of mind!