phone icon951-319-4402

We Bill Insurance!

Family Owned And Operated for over 20 years!

clock with 24 and 7 near the hands

60 Minute Response! phone icon 951-319-4402 Emergency Plumbing Help


Slab Leak Repair Riverside


Do you suspect that your Riverside home has a slab leak? 247 LeakMasters is a family owned and operated slab leak detection and repair business. Using top of the line electronic leak detection equipment, we find the source and fix your leak and pipes, and repair any water or flood damage. Our expertise allows for us to repair your leak with the minimal amount of damage.

We are not just plumbers but fully licensed contractors, this allows us to perform any necessary repairs. We are insurance specialists, working directly with your insurance company so you don’t have to.

We do not charge for call outs. Call us today to find out how your detection could be FREE! We can be with you in less than 60 minutes! In addition to fixing your slab leak we provide full service water damage restoration for Riverside homes. If you think you may have a slab leak, don’t delay, call us today!

Slab Leak Repair in Riverside

What is a slab leak?

Plumbing in most homes in Riverside utilize copper piping underneath a concrete foundation. It is common for cracks to develop in even the most reliable copper piping over time. The water coming from under the foundation is referred to as a slab leak. It takes time for the water to become visible since the source generally is not visible. Slab leaks can cause substantial damage. It is important to act quickly to minimize exposure to your home.



247 Emergency Leak Detection

Get Emergency Plumbing Help!






What does a slab leak look like?

If you can see the pipe, even a small leak is easy to trace. Slab leaks occur in the pipes buried deep in the concrete foundation of your home meaning that is not always visible.

How can I tell if I have a slab leak?

Although it may not be possible to see the slab leak you can use the following techniques to diagnose an unseen leak:

  1. Unusually High Water Bills – even the smallest hole in a water pipe can lose thousands of gallons per month. Check your water bill increased usage you cannot explain.
  2. Sound of Running Water – if you can hear water moving quickly through the pipes when faucets & appliances are off, you may have an issue.
  3. Moving Water Meter – If all appliances and faucets in the house are turned off and the meter is stil moving, you could have a problem.
  4. Standing Water or Saturated Ground - If a leak is left undetected for a long time, water can create a damp patch on the floor
Slab Leak Repair


What causes a slab leak?

While copper pipe is regarded as a reliable and long-lasting plumbing material, it can still fail. Some of the most common causes include:

Slab Leak Broken Copper Pipe
  1. Age - as a pipe gets older leaks become more likely. Our experience shows that homes over 25 years old are more likely to suffer a slab leak, but homes of any age can be affected.
  2. Incorrect Installation – if the pipe was bent or damaged when installed, problems can occur in later years.
  3. Temperature Changes - as the slab increases & decreases the pipes expand and contract. Vibration or or edges rubbing against the pipe can create holes.

Whatever the reason for the slab leak, it is important that the problem is found and repaired by a qualified plumber. This will prevent further, more expensive issues.


How can I find a slab leak?

Hot water lines associated with slab leaks make them easier to find. By using the electronic leak detector around a hot spot on the floor will help us pinpoint the location. Locating a cold water-line leak is very challenging. Electronic leak detection equipment is required so we can ‘listen’ to buried pipes. Identifying the location of the leak in the slab is possible with our specialized device. Modern electronic leak detection equipment means you do not have to dig into the floor to find the problem. Time and costs are reduced because we identify exactly where the repairs need to be done.

What is slab leak detection & how does it work?

Slab leak detection uses electronic equipment to locate the source of the leak. Leaks emit sound at different frequencies depending on the flow of the water and size of the hole. The equipment isolates the sound and locks on to the issue location. Because the sound travels through the slab, it is not necessary to dig up the floor to search for the problem. Non-invasive and non-destructive techniques are always used.

How do I repair a slab leak?

Once you know you have a slab leak, you have choices for repair. If the pipes are easily accessible we can make a direct repair, but this is rarely the case with slab leaks. We do not usually recommend digging up the floor to repair the leak as this can move the pipe and cause more problems in the future. Instead, a new pipe can be routed through the framework of the house isolating the area with leak.

Slab Leak Repair Service

It takes a discipline of skills for slab leak detection, repair repiping and water damage restoration. 247 LeakMasters are licensed plumbers and contractors, able to handle the complete job. Don’t worry about dealing with your insurance company. We will help you every step of the way.



If you suspect you have slab leak it is important to have a professional diagnose it right away to keep damage and costs down. 247 LeakMasters has 60 minute response times for Riverside around the clock. Our plumbing technicians are ready to help! We are a family owned local business that has been providing slab leak repair services for more than 20 years. Call us now!