phone icon858-375-9996

We Bill Insurance!

Family Owned And Operated for over 20 years!

clock with 24 and 7 near the hands

60 Minute Response! phone icon 858-375-9996 Emergency Plumbing Help


Slab Leak Repair Emerald Hills



Slab leaks in Emerald Hills can cause major long term damage to your home. When it comes to Slab leak detection in Emerald Hills, 247 LeakMasters a local and family owned business is your go to solution. 247 LeakMasters expert plumbers use the very latest in leak detection technology to diagnose the source of a leak so we can fix the problem and repair all of your flood or water damage. Our expertise allows for us to repair your leak with the minimal amount of damage.

No need to call out a separate repairman, our plumbers are licensed contractors and can perform repairs in the same call! We interface directly with your insurance provider so you can focus on more important things!

We do not charge for call outs. Call us today to find out how your detection could be FREE! We can be with you in less than 60 minutes! In addition to fixing your slab leak we provide full service water damage restoration for Emerald Hills homes. If you think you may have a slab leak, don’t delay, call us today!

Slab Leak Repair in Emerald Hills

What is a slab leak?

The plumbing systems in many properties in Emerald Hills were installed with copper piping buried in the large concrete foundation. Cracks and holes are known to develop over time in copper piped plumbing. The water coming from under the foundation is referred to as a slab leak. It takes time for the water to become visible since the source generally is not visible. To minimize damage to your home from a slab leak is important to act quickly.



247 Emergency Leak Detection

Get Emergency Plumbing Help!







What does a slab leak look like?


If you can see the pipe, even a small leak is easy to trace. Slab leaks occur in the pipes buried deep in the concrete foundation of your home meaning that is not always visible.


How can I tell if I have a slab leak?

Although it may not be possible to see the slab leak you can use the following techniques to diagnose an unseen leak:

  1. Unusually High Water Bills – even the smallest hole in a water pipe can lose thousands of gallons per month. Check your water bill increased usage you cannot explain.
  2. Sound of Running Water – if you can hear water moving quickly through the pipes when faucets & appliances are off, you may have an issue.
  3. Moving Water Meter – If all appliances and faucets in the house are turned off and the meter is stil moving, you could have a problem.
  4. Standing Water or Saturated Ground - If a leak is left undetected for a long time, water can create a damp patch on the floor
Slab Leak Repair


What causes a slab leak?


While copper pipe is regarded as a reliable and long-lasting plumbing material, it can still fail. Some of the most common causes include:

Slab Leak Broken Copper Pipe
  1. Age - as a pipe gets older leaks become more likely. Our experience shows that homes over 25 years old are more likely to suffer a slab leak, but homes of any age can be affected.
  2. Incorrect Installation – if the pipe was bent or damaged when installed, problems can occur in later years.
  3. Temperature Changes - as the slab increases & decreases the pipes expand and contract. Vibration or or edges rubbing against the pipe can create holes.

Whatever the reason for the slab leak, it is important that the problem is found and repaired by a qualified plumber. This will prevent further, more expensive issues.


How can I find a slab leak?


Generally it is pretty easy to use the hot water line to find the general area of a slab leak. Hot spots on the floor let us know where to use our electronic leak detector and zero in on the exact location of the problem. It is difficult to pinpoint the exact location of cold water-line leaks. Listening to a buried pipe is essential and requires special electronic leak detection equipment. We use specialized devices that show us with pinpoint accuracy where the slab leak is located. We avoid digging up your floor to find the issue by using the latest electronic leak detection equipment. We keep costs of the repair to a minimum by find the exact location.


What is slab leak detection & how does it work?


Slab leak detection uses electronic equipment to locate the source of the leak. Sounds are emitted at varying frequencies from leaks depending on the size of the hole and the flow of the water. Our detector locks on to the sound and pinpoints where the issue is. Sounds traveling through the slab helps us isolate the issue and avoid digging up your floor. The entire operation is non-invasive & non-destructive.


How do I repair a slab leak?


Once you know you have a slab leak, you have choices for repair. If the pipes are easily accessible we can make a direct repair, but this is rarely the case with slab leaks. We do not usually recommend digging up the floor to repair the leak as this can move the pipe and cause more problems in the future. Instead, a new pipe can be routed through the framework of the house isolating the area with leak.


Slab Leak Repair Service


The skills required for slab leak repair; detection, re-piping and water damage restoration are vast. 247 LeakMasters are licensed plumbers and contractors, able to handle the complete job. Our friendly technicians are experts at dealing directly with your homeowners insurance to give you peace of mind.



The more time that goes by before identifying a slab leak generally correlates to increased damage and repair fees. We are always ready to help! Our plumbing technicians can be at your Emerald Hills home in 60 minutes any day of the week regardless of what time it is. We are a family owned local business that has been providing slab leak repair services for more than 20 years. Call us now!