phone icon858-375-9996

We Bill Insurance!

Family Owned And Operated for over 20 years!

clock with 24 and 7 near the hands

60 Minute Response! phone icon 858-375-9996 Emergency Plumbing Help


Slab Leak Repair Lake Murray


Think you have a slab leak in your Lake Murray home or business? Family operated and local to Lake Murray, 247 LeakMasters is your number 1 choice for slab leak detection. We diagnose leaks, fix pipes and clean up any water or flood damage by using the latest electronic leak detection equipment. We figure out the best way to fix the leak without digging a big hole in your floor.

We are licensed contractors can perform quality repairs to any damage you have. As industry experts, we have plenty of experience working with directly with your insurance company for piece of mind.

We do not charge for call outs. Call us today to find out how your detection could be FREE! We can be with you in less than 60 minutes! In addition to fixing your slab leak we provide full service water damage restoration for Lake Murray homes. If you think you may have a slab leak, don’t delay, call us today!

Slab Leak Repair in Lake Murray

What is a slab leak?

The plumbing systems in many properties in Lake Murray were installed with copper piping buried in the large concrete foundation. It is common for cracks to develop in even the most reliable copper piping over time. This is what we call a slab leak. It is often difficult to find the source of the leak because the pipe is hidden in the slab and water can escape slowly over time. To minimize damage to your home from a slab leak is important to act quickly.



247 Emergency Leak Detection

Get Emergency Plumbing Help!






What does a slab leak look like?

If you can see the pipe, even a small leak is easy to trace. Slab leaks occur in the pipes buried deep in the concrete foundation of your home meaning that is not always visible.

How can I tell if I have a slab leak?

Although it may not be possible to see the slab leak you can use the following techniques to diagnose an unseen leak:

  1. Unusually High Water Bills – even the smallest hole in a water pipe can lose thousands of gallons per month. Check your water bill increased usage you cannot explain.
  2. Sound of Running Water – if you can hear water moving quickly through the pipes when faucets & appliances are off, you may have an issue.
  3. Moving Water Meter – If all appliances and faucets in the house are turned off and the meter is stil moving, you could have a problem.
  4. Standing Water or Saturated Ground - If a leak is left undetected for a long time, water can create a damp patch on the floor
Slab Leak Repair


What causes a slab leak?

While copper pipe is regarded as a reliable and long-lasting plumbing material, it can still fail. Some of the most common causes include:

Slab Leak Broken Copper Pipe
  1. Age - as a pipe gets older leaks become more likely. Our experience shows that homes over 25 years old are more likely to suffer a slab leak, but homes of any age can be affected.
  2. Incorrect Installation – if the pipe was bent or damaged when installed, problems can occur in later years.
  3. Temperature Changes - as the slab increases & decreases the pipes expand and contract. Vibration or or edges rubbing against the pipe can create holes.

Whatever the reason for the slab leak, it is important that the problem is found and repaired by a qualified plumber. This will prevent further, more expensive issues.


How can I find a slab leak?

Finding the general area of a slab leak from the hot water line is straightforward. The exact location is easy to find with our leak detector once we find the hotspot on the floor. It is difficult to pinpoint the exact location of cold water-line leaks. An electronic water leak detection device must be used to ‘listen’ to the length of buried pipe. Identifying the location of the leak in the slab is possible with our specialized device. Finding the location of the issue is done in a non destructive way because we use the latest electronic leak detection equipment. Finding the exact location can greatly reduce the time and cost of the repair.

What is slab leak detection & how does it work?

Slab leak detection uses electronic equipment to locate the source of the leak. Sounds are emitted at varying frequencies from leaks depending on the size of the hole and the flow of the water. The problem is located when the detector picks up the sound. We don't dig up your floor to search for the problem because we can detect the sound coming through the slab. The entire operation is non-invasive & non-destructive.

How do I repair a slab leak?

Once you know you have a slab leak, you have choices for repair. If the pipes are easily accessible we can make a direct repair, but this is rarely the case with slab leaks. We do not usually recommend digging up the floor to repair the leak as this can move the pipe and cause more problems in the future. Instead, a new pipe can be routed through the framework of the house isolating the area with leak.

Slab Leak Repair Service

Many skills are required to successfully find and repair a slab leak; detection, re-piping and water damage restoration. All or our plumbers are also licensed and insured contractors who can take on the task. Our friendly technicians are experts at dealing directly with your homeowners insurance to give you peace of mind.



If you think you have a slab leak, do not delay. That will only lead to greater damage and increased costs. We truly are 24/7. We have 60 minutes response times for Lake Murray plumbing emergencies. We are ready to help! We are a family owned local business that has been providing slab leak repair services for more than 20 years. Call us now!