phone icon760-385-8292

We Bill Insurance!

Family Owned And Operated for over 20 years!

clock with 24 and 7 near the hands

60 Minute Response! phone icon 760-385-8292 Emergency Plumbing Help


Slab Leak Repair Richland



Think you have a slab leak in your Richland home or business? 247 LeakMasters is a family owned and operated slab leak detection and repair business. 247 LeakMasters expert plumbers use the very latest in leak detection technology to diagnose the source of a leak so we can fix the problem and repair all of your flood or water damage. We figure out the best way to fix the leak without digging a big hole in your floor.

All of our plumbers are licensed contractors and experts in repairing home damage. Working with the insurance company can be a pain! Don’t worry, we will work directly with your insurance company and adjuster.

We do not charge for call outs. Call us today to find out how your detection could be FREE! We can be with you in less than 60 minutes! In addition to fixing your slab leak we provide full service water damage restoration for Richland homes. If you think you may have a slab leak, don’t delay, call us today!

Slab Leak Repair in Richland

What is a slab leak?

The plumbing systems in many properties in Richland were installed with copper piping buried in the large concrete foundation.  Despite the fact that copper is a reliable plumbing material, cracks and holes can develop over time. Since the leak source is under concrete and is not easily detectible, by the time you notice the issue it has caused damage already. This is what is known as a slab leak. If you suspect you have a slab leak, it is important to act quickly and avoid any further damage to your home.



247 Emergency Leak Detection

Get Emergency Plumbing Help!







What does a slab leak look like?


If you can see the pipe, even a small leak is easy to trace. Slab leaks occur in the pipes buried deep in the concrete foundation of your home meaning that is not always visible.


How can I tell if I have a slab leak?

Although it may not be possible to see the slab leak you can use the following techniques to diagnose an unseen leak:

  1. Unusually High Water Bills – even the smallest hole in a water pipe can lose thousands of gallons per month. Check your water bill increased usage you cannot explain.
  2. Sound of Running Water – if you can hear water moving quickly through the pipes when faucets & appliances are off, you may have an issue.
  3. Moving Water Meter – If all appliances and faucets in the house are turned off and the meter is stil moving, you could have a problem.
  4. Standing Water or Saturated Ground - If a leak is left undetected for a long time, water can create a damp patch on the floor
Slab Leak Repair


What causes a slab leak?


While copper pipe is regarded as a reliable and long-lasting plumbing material, it can still fail. Some of the most common causes include:

Slab Leak Broken Copper Pipe
  1. Age - as a pipe gets older leaks become more likely. Our experience shows that homes over 25 years old are more likely to suffer a slab leak, but homes of any age can be affected.
  2. Incorrect Installation – if the pipe was bent or damaged when installed, problems can occur in later years.
  3. Temperature Changes - as the slab increases & decreases the pipes expand and contract. Vibration or or edges rubbing against the pipe can create holes.

Whatever the reason for the slab leak, it is important that the problem is found and repaired by a qualified plumber. This will prevent further, more expensive issues.


How can I find a slab leak?


Hot water lines associated with slab leaks make them easier to find. Hot spots on the floor let us know where to use our electronic leak detector and zero in on the exact location of the problem. Cold-water line leaks present a much more challenging issue to locate. Because the pipe is buried, we must use an electro-acoustic leak detection device so we can ‘hear’ where the issue is. We use specialized devices that show us with pinpoint accuracy where the slab leak is located. We avoid digging up your floor to find the issue by using the latest electronic leak detection equipment. Pinpoint accuracy helps us reduce time and costs for your repair.


What is slab leak detection & how does it work?


It is important to use electronic equipment to locate the exact source of your slab leak. The flow of water and size of the hole gives the leak a unique sound at a customized frequency. Our detector locks on to the sound and pinpoints where the issue is. We don't dig up your floor to search for the problem because we can detect the sound coming through the slab. Our operations don't cause damage and are non-invasive.


How do I repair a slab leak?


Once you know you have a slab leak, you have choices for repair. If the pipes are easily accessible we can make a direct repair, but this is rarely the case with slab leaks. We do not usually recommend digging up the floor to repair the leak as this can move the pipe and cause more problems in the future. Instead, a new pipe can be routed through the framework of the house isolating the area with leak.


Slab Leak Repair Service


Water damage restoration, repiping, and detection and slab leak repairs take a variety of skills. The technicians at 247 LeakMasters are fully licensed contractors in addition to being plumbers. Don’t worry about dealing with your insurance company. We will help you every step of the way.



Delays in diagnosing a slab leak can cause more damage drive up repair costs. We can have a plumbing technician from 247 LeakMasters at your Richland property in 60 minutes or less, 24 hours a day, 7 days a week. We are a family owned local business that has been providing slab leak repair services for more than 20 years. Call us now!