phone icon714-759-2975

We Bill Insurance!

Family Owned And Operated for over 20 years!

clock with 24 and 7 near the hands

60 Minute Response! phone icon 714-759-2975 Emergency Plumbing Help


Slab Leak Repair Mid-City



Slab leaks in Mid-City can cause major long term damage to your home. When it comes to Slab leak detection in Mid-City, 247 LeakMasters a local and family owned business is your go to solution. Using top of the line electronic leak detection equipment, we find the source and fix your leak and pipes, and repair any water or flood damage. We treat your home like ours and use non-invasive techniques to repair your leak.

No need to call out a separate repairman, our plumbers are licensed contractors and can perform repairs in the same call! We are insurance specialists, working directly with your insurance company so you don’t have to.

We do not charge for call outs. Call us today to find out how your detection could be FREE! We can be with you in less than 60 minutes! In addition to fixing your slab leak we provide full service water damage restoration for Mid-City homes. If you think you may have a slab leak, don’t delay, call us today!

Slab Leak Repair in Mid-City

What is a slab leak?

Most Mid-City homes have copper piping under a concrete slab type foundation. Cracks and holes are known to develop over time in copper piped plumbing. Since the leak source is under concrete and is not easily detectible, by the time you notice the issue it has caused damage already. This is what is known as a slab leak. If you suspect you have a slab leak, it is important to act quickly and avoid any further damage to your home.



247 Emergency Leak Detection

Get Emergency Plumbing Help!







What does a slab leak look like?


If you can see the pipe, even a small leak is easy to trace. Slab leaks occur in the pipes buried deep in the concrete foundation of your home meaning that is not always visible.


How can I tell if I have a slab leak?

Although it may not be possible to see the slab leak you can use the following techniques to diagnose an unseen leak:

  1. Unusually High Water Bills – even the smallest hole in a water pipe can lose thousands of gallons per month. Check your water bill increased usage you cannot explain.
  2. Sound of Running Water – if you can hear water moving quickly through the pipes when faucets & appliances are off, you may have an issue.
  3. Moving Water Meter – If all appliances and faucets in the house are turned off and the meter is stil moving, you could have a problem.
  4. Standing Water or Saturated Ground - If a leak is left undetected for a long time, water can create a damp patch on the floor
Slab Leak Repair


What causes a slab leak?


While copper pipe is regarded as a reliable and long-lasting plumbing material, it can still fail. Some of the most common causes include:

Slab Leak Broken Copper Pipe
  1. Age - as a pipe gets older leaks become more likely. Our experience shows that homes over 25 years old are more likely to suffer a slab leak, but homes of any age can be affected.
  2. Incorrect Installation – if the pipe was bent or damaged when installed, problems can occur in later years.
  3. Temperature Changes - as the slab increases & decreases the pipes expand and contract. Vibration or or edges rubbing against the pipe can create holes.

Whatever the reason for the slab leak, it is important that the problem is found and repaired by a qualified plumber. This will prevent further, more expensive issues.


How can I find a slab leak?


Generally it is pretty easy to use the hot water line to find the general area of a slab leak. A hot spot on the floor will give the approximate location, allowing for us to quickly find the accurate location using a leak detector. Locating a cold water-line leak is very challenging. An electronic water leak detection device must be used to ‘listen’ to the length of buried pipe. We use specialized devices that show us with pinpoint accuracy where the slab leak is located. Non-invasive electronic detection equipment means we don't have to damage your home to find the location of the issue. Pinpoint accuracy helps us reduce time and costs for your repair.


What is slab leak detection & how does it work?


The source of the leak requires electronic equipment that is made for slab leak detection. Sounds are emitted at varying frequencies from leaks depending on the size of the hole and the flow of the water. The sound is picked up by the detector and used to locate the problem. We avoid digging up the floor to find the issue because the sound travels through the slab. Non-destructive and non-invasive techniques are our specialty.


How do I repair a slab leak?


Once you know you have a slab leak, you have choices for repair. If the pipes are easily accessible we can make a direct repair, but this is rarely the case with slab leaks. We do not usually recommend digging up the floor to repair the leak as this can move the pipe and cause more problems in the future. Instead, a new pipe can be routed through the framework of the house isolating the area with leak.


Slab Leak Repair Service


Water damage restoration, repiping, and detection and slab leak repairs take a variety of skills. All or our plumbers are also licensed and insured contractors who can take on the task. Our friendly technicians are experts at dealing directly with your homeowners insurance to give you peace of mind.



If you think you have a slab leak, do not delay. That will only lead to greater damage and increased costs. We are always ready to help! Our plumbing technicians can be at your Mid-City home in 60 minutes any day of the week regardless of what time it is. As a family owned, run and operated local business, we have over 20 years experience as the slab leak repair experts! Call today for your peace of mind!