phone icon714-759-2975

We Bill Insurance!

Family Owned And Operated for over 20 years!

clock with 24 and 7 near the hands

60 Minute Response! phone icon 714-759-2975 Emergency Plumbing Help


Slab Leak Repair Sandpointe



Think you have a slab leak in your Sandpointe home or business? Family operated and local to Sandpointe, 247 LeakMasters is your number 1 choice for slab leak detection. Our plumbing technicians use the latest leak detection equipment to find the source and repair the pipe & any water or flood damage. Our expertise allows for us to repair your leak with the minimal amount of damage.

No need to call out a separate repairman, our plumbers are licensed contractors and can perform repairs in the same call! We interface directly with your insurance provider so you can focus on more important things!

We do not charge for call outs. Call us today to find out how your detection could be FREE! We can be with you in less than 60 minutes! In addition to fixing your slab leak we provide full service water damage restoration for Sandpointe homes. If you think you may have a slab leak, don’t delay, call us today!

Slab Leak Repair in Sandpointe

What is a slab leak?

Concrete slabs with copper piping run underneath the foundation are common in Sandpointe. Cracks and holes are known to develop over time in copper piped plumbing. This leads to what is known as a slab leak. Because the leak source is not visible by the time you actually see the water damage can be extensive. Quick action is of the upmost importance if you think you have a slab leak, this can prevent further damage to your home.



247 Emergency Leak Detection

Get Emergency Plumbing Help!







What does a slab leak look like?


If you can see the pipe, even a small leak is easy to trace. Slab leaks occur in the pipes buried deep in the concrete foundation of your home meaning that is not always visible.


How can I tell if I have a slab leak?

Although it may not be possible to see the slab leak you can use the following techniques to diagnose an unseen leak:

  1. Unusually High Water Bills – even the smallest hole in a water pipe can lose thousands of gallons per month. Check your water bill increased usage you cannot explain.
  2. Sound of Running Water – if you can hear water moving quickly through the pipes when faucets & appliances are off, you may have an issue.
  3. Moving Water Meter – If all appliances and faucets in the house are turned off and the meter is stil moving, you could have a problem.
  4. Standing Water or Saturated Ground - If a leak is left undetected for a long time, water can create a damp patch on the floor
Slab Leak Repair


What causes a slab leak?


While copper pipe is regarded as a reliable and long-lasting plumbing material, it can still fail. Some of the most common causes include:

Slab Leak Broken Copper Pipe
  1. Age - as a pipe gets older leaks become more likely. Our experience shows that homes over 25 years old are more likely to suffer a slab leak, but homes of any age can be affected.
  2. Incorrect Installation – if the pipe was bent or damaged when installed, problems can occur in later years.
  3. Temperature Changes - as the slab increases & decreases the pipes expand and contract. Vibration or or edges rubbing against the pipe can create holes.

Whatever the reason for the slab leak, it is important that the problem is found and repaired by a qualified plumber. This will prevent further, more expensive issues.


How can I find a slab leak?


Hot water lines associated with slab leaks make them easier to find. Hot spots on the floor let us know where to use our electronic leak detector and zero in on the exact location of the problem. Leaks from the cold-water line are much more difficult to locate. Because the pipe is buried, we must use an electro-acoustic leak detection device so we can ‘hear’ where the issue is. Identifying the location of the leak in the slab is possible with our specialized device. Modern electronic leak detection equipment means you do not have to dig into the floor to find the problem. Finding the exact location can greatly reduce the time and cost of the repair.


What is slab leak detection & how does it work?


Slab leak detection uses electronic equipment to locate the source of the leak. Sounds are emitted at varying frequencies from leaks depending on the size of the hole and the flow of the water. The sound is picked up by the detector and used to locate the problem. Because the sound travels through the slab, it is not necessary to dig up the floor to search for the problem. The entire operation is non-invasive & non-destructive.


How do I repair a slab leak?


Once you know you have a slab leak, you have choices for repair. If the pipes are easily accessible we can make a direct repair, but this is rarely the case with slab leaks. We do not usually recommend digging up the floor to repair the leak as this can move the pipe and cause more problems in the future. Instead, a new pipe can be routed through the framework of the house isolating the area with leak.


Slab Leak Repair Service


It takes a discipline of skills for slab leak detection, repair repiping and water damage restoration. The technicians at 247 LeakMasters are fully licensed contractors in addition to being plumbers. Our friendly technicians are experts at dealing directly with your homeowners insurance to give you peace of mind.



If you think you have a slab leak, do not delay. That will only lead to greater damage and increased costs. We truly are 24/7. We have 60 minutes response times for Sandpointe plumbing emergencies. We are ready to help! We are locally based and family owned slab repair services experts. Call Us Today!